Convenient multi-purpose bracing for roofs, ceilings and walls.

Uses

Pryda Strap Brace is suitable for bracing walls and truss/rafter roof construction (spans up to 12m) in residential buildings. Use Pryda Maxi Strap for larger spans and commercial and industrial buildings.

Pryda Tensioners provide a fast, reliable and simple method of tensioning long lengths of bracing strap.

Features

Pryda Strap Brace is ideal for bracing applications where timber braces are not feasible because of their thickness or because timber can’t be bent, eg, exposed beams or rafters, or trusses.

It saves on-site labour time as studs do not have to be notched. The unnotched studs can often be a smaller size and hence cheaper than notched studs.

Available in long length coils for ease of handling and minimum wastage.

The Pryda Strap Brace Tensioners are designed with a deeper saddle for improved tensioning capabilities, and a smoother edge finish for better manual handling.

Installation

For installation instructions for Wall, Roof and Floor Bracing, please refer to the Pryda Builders Guide. 

Pryda Strap Brace

Product Code Size 
SB10 25 x 0.8mm x 10m
SB3025 x 0.8mm x 30m
SB30T25 x 0.8mm x 30m with 5 Tensioners
SB15/S (Stainless Steel)25 x 0.8mm x 15m

Pryda Maxi Strap

Product Code Size 
SBI            50 x 0.8mm x 30m
SBI/15  50 x 0.8mm x 15m
SBI/S (Stainless Steel)    50 x 0.8mm x 30m

Pryda Tensioners (for Strap Brace)

Product Code Size 
SBT            25mm
SBI/T  50mm
SBT/SS (Stainless Steel)25mm
SBI/TS (Stainless Steel)50mm